Meyer Sound Galileo 616 Betriebsanweisung PDF herunterladen (Seite 52)

CHAPTER 4: USING THE GALILEO FRONT PANEL

Equalization Settings Menu

Use the Up and Down arrows, and press the Enter button to select from the following sub-

menu items:

■ Bypass All EQ: Temporarily removes all equalization from the input or output channel sig-

nal; select the item again to enable.

■ Bypass Parametric: Temporarily removes all parametric equalization from the input or

output channel signal while any other EQ remains; select the item again to enable.

■ Bypass TruShaping: Temporarily removes all TruShaping equalization from the input or

output channel signal while any other EQ remains; select the item again to enable.

■ Bypass Low/High Pass: Only in Output Processing, with the default as Bypassed, tempo-

rarily removes the low or high pass equalization from the output signal while any other EQ

remains; select the item again to enable.

■ VX-1 TruShaping Mode: Combines the upper two bands of the TruShaping EQ into a sin-

gle equalization band that is functionally the same as the analog VX-1 equalizer.

TIP: When an output channel is on its High/Low Pass EQ page in either the graph

or numeric view, pushing the Enter button will toggle between Enabled and

Bypassed.

Equalization Settings Menu

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 67 68

Keine Kommentare

Meyer Sound Galileo 616 Betriebsanweisung Seite 52