Meyer Sound Stella-4 Betriebsanleitung

Keep these important operating instructions. Check www.meyersound.com for updates.OPERATING INSTRUCTIONSINDUSTRIAL SERIES Stella-4 Constellation Insta

CHAPTER 1: INTRODUCTION10Stella-4C Installation LoudspeakerThe Stella-4C ceiling mount installation loudspeaker offers the same sonic capabilities as

11CHAPTER 2: CONNECTING STELLA LOUDSPEAKERSSTELLA CONNECTORStella loudspeakers receive DC power and balanced audio from a five-pin Phoenix connector o

CHAPTER 2: CONNECTING STELLA LOUDSPEAKERS12STELLA-188 POWER SUPPLYThe Stella-188 was designed to deliver eight channels of balanced audio and DC power

STELLA OPERATING INSTRUCTIONS13Stella-188 Current DrawThe current draw for the Stella-188 is dynamic and fluctu-ates as operating levels change for th

CHAPTER 2: CONNECTING STELLA LOUDSPEAKERS14Safety IssuesPay close attention to these important electrical and safety issues. The Stella-188 requires

STELLA OPERATING INSTRUCTIONS15Channel Outputs (1–8)The eight Channel Outputs deliver DC power (18 V DC) and balanced audio to up to eight loudspeaker

CHAPTER 2: CONNECTING STELLA LOUDSPEAKERS16Cable Lengths and Cable Gauges for Stella LoudspeakersWhen connecting a single Stella-4 or Stella-4C to a S

STELLA OPERATING INSTRUCTIONS17Figure 1: Stella-188 with Eight Stella-4s (One Unit Connected to Each Channel Output)Figure 2: Stella-188 with 16 Stell

CHAPTER 2: CONNECTING STELLA LOUDSPEAKERS18

19CHAPTER 3: STELLA MOUNTING OPTIONSIMPORTANT SAFETY CONSIDERATIONSWhen installing Meyer Sound loudspeakers, the following precautions should always b

iiDECLARATION OF CONFORMITY ACCORDING TO ISO/IEC GUIDE 22 AND EN 45014© 2011Meyer Sound. All rights reserved.Stella Operating Instructions, PN 05.161

CHAPTER 3: STELLA MOUNTING OPTIONS20Mounting the Stella-4 with the MMB BracketTo mount the Stella-4 with the MMB bracket:1. Separate the MMB wall plat

STELLA OPERATING INSTRUCTIONS214. Attach the pivot plate assembly to the wall plate using the screw and washers previously removed. Tighten the screw.

CHAPTER 3: STELLA MOUNTING OPTIONS22MOUNTING THE STELLA-8CThe Stella-8C can be mounted flush in ceilings and walls with any standard 8-inch backbox (s

23APPENDIX A: STELLA SPECIFICATIONSSTELLA-4 SPECIFICATIONSOperating Frequency Range 100 Hz – 18 kHzNote: Recommended maximum operating frequency range

APPENDIX A: STELLA SPECIFICATIONS24STELLA-4C SPECIFICATIONSOperating Frequency Range 100 Hz – 18 kHzNote: Recommended maximum operating frequency rang

STELLA OPERATING INSTRUCTIONS25STELLA-8C SPECIFICATIONSOperating Frequency Range 100 Hz – 18 kHzNote: Recommended maximum operating frequency range. R

APPENDIX A: STELLA SPECIFICATIONS26STELLA-188 SPECIFICATIONSAudio Input 8-channel 25-pin D-sub connector (Tascam Mulitrack format)Outputs 8 channels o

STELLA OPERATING INSTRUCTIONS27STELLA COMPLIANCE of North America, Inc.CUSTUV Rheinland

APPENDIX A: STELLA SPECIFICATIONS28

iiiFEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, p

Meyer Sound Laboratories Inc.2832 San Pablo AvenueBerkeley, CA 94702www.meyersound.comT: +1 510 486.1166F: +1 510 486.8356© 2011Meyer Sound Labora

ivSYMBOLS USEDThese symbols indicate important safety or operating features in this booklet and on the chassis:IMPORTANT SAFETY INSTRUCTIONS1. Read th

vSAFETY SUMMARYEnglish To reduce the risk of electric shock, dis-connect the loudspeaker from the AC mains before installing audio cable. Reconnect t

vi

viiCONTENTSChapter 1: Introduction 9How to Use this Manual 9Stella Loudspeakers 9Stella-4C Installation Loudspeaker 9Stella-4C Installation Loudspeake

CONTENTSviii

9CHAPTER 1: INTRODUCTIONHOW TO USE THIS MANUALMake sure to read these operating instructions in their entirety before configuring a system with Stella